Technical Data sheet
|Vehicle||Coach, Van,Engineering Vehicle,Recreational Vehicle|
Rooftop all-in-one structure, referigerants pre-charged, easy installation.
DC 24V Voltage, suitable for van assembly or modification.
With plastic air opening, no need overall air ducts, only opening on top.
PWM control,7 steps for evaporator fan, 3 steps for condenser fan, meeting customer needs.
Aluminium structure, total weight below 27kg.
Noise level reduced 2dB
First clean the rooftop surface, then put glue to install the sponge and rubber pad, later put glue with a glue gun around the sponge.
Evaporator and Condensor Installation
Lift the condensor and evaporator to the top of the bus, install and connect the pipes and wiring harness, then fix the condesor and evaporator to the bus rooftop, put glue for sealants where needed.
Move the cover to the top of condensor and evaporator, check the position and drop the cover, fix screws and check the gap to follow requrements.
South America References
Please feel free to send us your inquiry, and we will give you a reply within 24 hours.
+86 0371 85331365
+86 371 6784 8720
No.8 Changchun Rd., High-Tech Zone Zhengzhou, 450001, P.R.China